Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Somerville Homeowners
A garage door that won’t open or close turns your whole day upside down. It’s often the front door you actually use, the way you get the car out, and one of the main things keeping your house and tools secure. We fix them: snapped torsion springs, frayed cables, bent tracks, dead openers, broken panels, and sensors that stop the door for no obvious reason. Our technicians have up to 11 years of experience, and we work on the brands that are actually installed in Somerville homes. We offer same-day service when the schedule allows and treat spring and cable work as the safety-critical jobs they are. Call (844) 793-4614. We answer 24/7, with fast dispatch from 7am to 7pm.
What Our Garage Door Repair Service Includes
Repair is the core of what we do, so we handle every part of the door and its opener rather than sending pieces of the job elsewhere. Here’s what each repair covers and when it tends to come up.
Panel Replacement
Garage door panels take the hits: a car bumper, a bounced basketball, a storm-blown branch, or years of sun that fade and chalk the finish. When a section is dented, cracked or bowed, the door can bind or the panel can weaken enough to stop sealing against the weather. We source a matching section for your door style, Amarr and Clopay included, and reset it so the panel lines up with the rest of the door.

Spring Repair
Torsion and extension springs counterbalance the full weight of the door, so when one fails the door can become dangerously heavy or drop without warning. You usually hear a loud bang from the garage, then find the door won’t lift, or lifts a few inches and stops. Spring repair is offered as a standard service here, never as an upsell, and we replace the spring, check the other side, and rebalance the door so the opener isn’t straining against a bad counterweight.

Cable Repair
The lift cables run from the bottom corners of the door up around the drums and work with the springs to raise it evenly. A frayed or snapped cable is a real problem because the door can hang crooked or come down hard on one side. These are high-tension parts, so this isn’t a job to attempt with household tools; we replace the cable, inspect the drum and bottom bracket, and test the door under load before we leave.

Track Realignment
The tracks guide the door as it travels, and even a small bend from a bump or a shifting frame can make the door scrape, stick or drift off line. If the door shudders on the way up or the gap along the top isn’t even, the track is usually the cause. We straighten and realign the vertical and horizontal tracks, check the brackets against the framing, and make sure the rollers sit properly in the channel afterward.
Roller Replacement
Rollers are small, cheap parts that quietly wear out and get blamed for a door that’s suddenly noisy or shaky. Steel rollers flat-spot and nylon ones crack with age, and a worn roller puts extra load on the opener and the tracks. We swap out the set, match the right roller type to your door’s weight, and the difference in noise and smoothness is usually obvious straight away.
Sensor Calibration
A garage door’s safety sensors sit at the bottom of the tracks and stop the door reversing onto anything in its path. Dust, a knocked bracket, sunlight hitting the lens, or misalignment can make the door refuse to close, or close partway and reverse. We test both beams, clean and realign the sensors, and check the wiring and the opener’s travel and force settings. This is also a good moment to check the safety reverse function that protects pets and kids.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We work on the brands that dominate Somerville garages, which means we diagnose by how a specific make and model behaves instead of guessing from scratch. On Amarr doors we know where the panel seams and bottom sections tend to fail, and on Clopay we can match sections and hardware to the door you already have. Wayne Dalton and Raynor both have their own quirks in track and roller design, and knowing those saves time on the job.
Opener and spring side, we’re familiar with LiftMaster, Chamberlain, Genie and Craftsman equipment as well, including the circuit-board and logic failures that show up on older units and the connectivity problems that come up with newer smart openers. Whether you have a Wayne Dalton door with a Craftsman opener or a Raynor door with a LiftMaster motor, we can help. Brand familiarity is a big part of the reason we get it right the first time.
Signs You Need Garage Door Repair Right Now
Some garage door problems give you warning. Others don’t. Here’s what to watch for in a Somerville home, and what each sign usually means.
- A loud bang from the garage. That snap is often a torsion spring breaking, and the door will feel extremely heavy or won’t open at all afterward. Stop using the opener until someone looks at it, because a door running on a failed spring can damage the opener or drop unexpectedly.
- The door goes up crooked or hangs to one side. This points to a stretched or snapped cable or a failed spring on one side. Running it that way puts uneven stress on the tracks and the door itself.
- Grinding, scraping or a jerky ride. Worn rollers, dry hinges or a bent track are the usual causes. It starts as noise and ends as a door that sticks or comes off the track entirely. A tune-up now is cheaper than a track rebuild later.
- The door won’t close, or reverses partway. Misaligned safety sensors are the most common reason, and it’s a safety feature you don’t want to bypass. Sometimes the opener’s travel limits need adjusting instead.
- The opener runs but the door doesn’t move, or the remotes stop working. This can be a stripped gear, a failed circuit board, a dead safety sensor or a snapped lift cable. It’s important to know which before replacing anything, and that’s what a proper diagnostic sorts out.
Our Garage Door Repair Process – Step by Step
We keep the process plain so you know what’s happening and what it will cost before anyone starts turning bolts.
- 1
We talk it through first. When you call, we ask what the door is doing, what kind of door and opener you have, and how urgent it is. That helps us arrive with the right parts and gives you a realistic idea of timing.
- 2
We inspect the whole door, not just the obvious part. We check the springs, cables, drums, rollers, hinges, tracks, panels and the opener, and test the door by hand to feel where it’s binding. A failing spring often hides behind a symptom that looks like an opener problem.
- 3
We explain the findings and give you a written price. You get a clear description of what’s wrong, what we recommend, and the cost, and the price is quoted and agreed before any work starts. If something can wait, we’ll tell you that too.
- 4
We do the repair. Standard repairs like cables, rollers, sensors and tracks are usually handled on the first visit. Springs are matched to your door’s weight and balanced properly, and we use the right tools for high-tension work rather than forcing anything.
- 5
We test and show you the result. We run the door through full cycles, check the safety reverse, confirm the balance and alignment, and walk you through what we did. If the door needs a bigger conversation, like a panel that’s no longer made or a door that’s near the end of its life, we’ll be straightforward about it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Somerville?
Garage door repair in Somerville typically runs $150 – $600, and most single-part fixes land toward the lower end of that. Breaking it down by job: a typical spring repair is $180 – $340 for one spring, and because a matched pair is usually replaced together, a pair costs about twice that. Cable repair runs $130 – $250, opener repair $120 – $320, panel replacement $250 – $500, track realignment $120 – $240, roller replacement $110 – $220, and sensor calibration is usually wrapped into a diagnostic or tune-up. Opener installation, if you’re replacing rather than repairing, is $250 – $550, and a full new door is $700 – $2,200.
What moves the number is the part involved, the door’s size and weight, how many components failed together, and whether your model’s parts are common or need to be ordered. Two things keep you from overpaying: get the problem diagnosed properly rather than replacing parts on a hunch, and ask for the price in writing before work starts. Our estimates are free, include a full inspection, and the written estimate sets the final price. Call (844) 793-4614 for an exact quote.
Garage Door Repair Near Somerville – Our Service Area
We take garage door repair calls across Somerville and the surrounding towns, including Cambridge, Medford, Everett, Malden, Chelsea, Arlington, Belmont, Watertown, Winchester, Melrose and Brookline. Response depends on where you are and how the day is running, but we aim for same-day service whenever the schedule allows. If you’re just outside the area, call and we’ll confirm. You can also read more about our garage door repair coverage in Cambridge and garage door repair in Medford.
Serving Somerville, MA – Our Local Coverage Area
We serve Somerville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Somerville
Garage door repair means fixing the parts that make the door open, close, balance and stay secure: springs, cables, tracks, rollers, hinges, panels, sensors and the opener itself. It’s different from installation, which is a full replacement of the door or motor. We handle repair across every one of those components as a single-trade specialist. If you’re not sure which part is at fault, that’s what the inspection is for; call (844) 793-4614 and estimates are free.
Most standard repairs take one to three hours, and many are finished on the first visit. Rollers, sensors and cables are usually quick, while spring replacement takes a little longer because the door has to be balanced and tested afterward. If a panel or less common part needs to be ordered, we’ll tell you the timing up front. Call (844) 793-4614 for an exact quote on your door.
Garage door repair in Somerville typically costs $150 – $600, depending on the part and how many components failed. Spring repair is $180 – $340 for one spring, with a matched pair about twice that, cable repair $130 – $250, and opener repair $120 – $320. The written estimate sets the final price, and the price is agreed before any work starts. Call (844) 793-4614 for an exact quote; estimates are free.
Yes, we service Wayne Dalton doors and openers, along with Amarr, Clopay, Raynor, LiftMaster, Chamberlain, Genie and Craftsman equipment. Knowing how each brand’s tracks, panels, springs and opener electronics wear makes the diagnosis faster and more accurate. If your door is another make entirely, call and we’ll confirm before we book. Reach us at (844) 793-4614 for a free estimate.
Same-day service is available when the schedule allows, and we treat garage door calls as urgent rather than routine. We answer the phone 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 793-4614 and we’ll tell you the soonest we can get there.
We stand behind the work we do, and we’ll walk you through what’s covered on your specific repair before we start. Warranty terms vary by job and part, so we spell them out in the estimate rather than making a blanket promise. The written estimate sets the final price and sets out the scope. Call (844) 793-4614 with questions and we’ll answer them plainly.
Clear the floor area under and around the door and make sure there’s a path to the opener and the wall button. If you have the door’s manual, model number or a photo of the label, that helps us match parts exactly. Move any cars out of the garage bay so the door can run through full cycles during testing. Call (844) 793-4614 if you’re unsure what’s needed.
Schedule Your Garage Door Repair Service in Somerville Today
A door that won’t move is a problem worth fixing properly the first time. Call (844) 793-4614 to book garage door repair in Somerville. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, the price is agreed in writing before any work starts, and our technicians have up to 11 years of experience. You can also start with our garage door repair overview or visit Somerville Garage Door Repair Pros. For related help, see our pages on garage door repair and garage door repair in Medford.
Written by the team at Somerville Garage Door Repair Pros.