Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Somerville?
Garage door repair in Somerville typically costs $150 – $600 for most jobs. A single spring repair runs $180 – $340, cable repair $130 – $250, and opener repair $120 – $320. Those are typical estimated ranges for the Somerville market, and the written estimate you get before any work starts sets the final price.
That price band covers the everyday failures we see across Somerville’s triple-deckers, older two-families, and newer townhouse rows: a torsion spring that snaps on a cold morning, a cable that frays, an opener that stops responding, or a panel that takes a hit backing out of a tight driveway. We’re a single-trade garage door company, so every job is a door job. Call (844) 793-4614 and we’ll book a free estimate.
Key Takeaways:
- Most garage door repairs in Somerville land between $150 and $600.
- Spring repair is $180 – $340 per spring; a matched pair is usually replaced together and costs about twice that.
- Opener repair is $120 – $320; a full opener installation is $250 – $550.
- A new door installation runs $700 – $2200.
- Estimates are free, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Garage Door Repair Cost Breakdown (2026)
Here’s how the common jobs break down for Somerville homeowners. These are typical estimated ranges. Tight quarters, tight driveways, and older door hardware can shift a job toward the top of a range, but the written estimate you receive is the number that counts.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
A spring replacement is priced per spring. Garage doors usually use a matched pair of torsion springs, and when one breaks the other is typically close behind because they’ve carried the same load for the same years. That’s why we usually replace springs as a pair, which costs about twice the single-spring range. Replacing one and leaving the other is how you end up with a second breakdown a short time later.
What drives the total up or down? The type of spring matters: torsion springs cost more than extension springs. The door’s size and weight matter. So does how much of the hardware has worn out together. An opener that needs a new logic board or a belt is a different job than replacing the whole unit, and a single dented panel is less than several that need swapping. When the door is beyond economical repair, the conversation shifts from a repair to an installation, and those ranges are much wider.
What Affects Garage Door Repair Pricing in Somerville
Somerville has its own set of conditions that shape a garage door bill. These are the factors we see move the number most often.
- The age and type of the door. Somerville has a lot of older housing stock alongside newer townhouse builds, and the doors on the older houses are more likely to be extension-spring or heavy wood doors. Older hardware means more parts are worn at once, so a job can grow from one item to two or three.
- Freezing winters and road grit. Cold snaps make springs more brittle and cause metal to contract, which is when most torsion spring failures happen here. Winter also drives grit and ice-melt residue into rollers and tracks, so a tune-up in late fall often prevents a mid-January breakdown. Our technicians have up to 11 years of experience with Massachusetts winters and know which parts fail first.
- Tight driveways and low-clearance garages. Space is at a premium in Somerville, and many garages are small, with low headroom or tight side clearance. That can limit what opener or spring setup fits, which affects the parts needed and therefore the price.
- The brand and opener system. We work on the eight brands installed in most homes here: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Brand-specific behavior matters. A Genie opener that won’t respond isn’t the same diagnosis as a LiftMaster with a dead logic board, and knowing the difference is what keeps you from paying for parts you don’t need.
- Whether the door needs a repair or a replacement. A single panel, a set of rollers, or a cable is a repair. A door that’s cracked, badly bent, or rusted through the frame may cost less over time to replace than to keep patching. We’ll tell you which side of that line you’re on.
- How quickly the problem is caught. A worn roller replaced early is a small line item. Ignored, it grinds the track and drags the opener into the repair too, and the bill grows. Small sounds are cheap to fix; ignored sounds aren’t.
Somerville’s housing is also dominated by older triple-deckers and two-families where the garage is often detached, alley-fed, or shared. A detached garage with a single narrow door, or a garage at the end of a tight passage, can add time to a job that would be quick on a wide suburban driveway. That time shows up in the estimate, not as a surprise at the end.
What Does Each Repair Actually Involve?
Knowing what the technician does helps you read an estimate and know you’re not being sold something you don’t need.
Spring repair
Torsion springs are the most common setup and the most dangerous part of any garage door. They’re under high tension and can cause serious injury if handled without the right tools and training. We don’t recommend adjusting or replacing springs yourself. Our technicians handle spring repair as a core service because it’s the failure that most often leaves a door stuck, and it’s the repair a general handyman will often decline. When we replace a spring, we match it to the door’s weight and cycle use so it lasts as long as it should.
Cable repair
Cables run alongside the springs and keep the door level as it travels. A frayed or snapped cable usually means the door drops or hangs at an angle. Like springs, cables are under tension and should be treated as a professional repair. A snapping cable can also whip, so keep clear and call us.
Opener repair and installation
Openers fail in predictable ways: a motor that hums without lifting, a logic board that’s dead, a remote that won’t pair, or smart-home connectivity that drops. We repair opener electronics across smart and legacy systems, and we install new openers when repair isn’t the better call. Our brand familiarity with LiftMaster, Chamberlain, Genie, and Craftsman means we diagnose by how that model behaves, not by guesswork. If the opener is older and parts are scarce, a new unit at $250 – $550 is often the sensible route.
Panels, tracks, and rollers
A dented panel from a backing-out mishap, a track knocked out of line, or worn rollers are all straightforward jobs. Track realignment typically runs $120 – $240, roller replacement $110 – $220, and a single panel replacement $250 – $500. Left alone, a misaligned track can bend the door and turn a small repair into a bigger one, so it’s worth fixing early.
How to Save on Garage Door Repair
You don’t need a coupon to keep the bill down. Most savings come from catching problems early and asking the right questions up front.
- Fix small issues before they spread. A noisy door, a slow spot, or a roller that squeals is a small repair now. Ignored, it wears the track and drags the opener into the job, and that’s when the price climbs toward the top of the range.
- Tune up before winter. Have the springs, cables, rollers, and tracks checked in the fall. Cold weather is when torsion springs fail most often in Somerville, and a check in milder weather is easier on both the door and your wallet.
- Keep the tracks clean and clear. Grit and ice-melt residue in the tracks cause binding. A light cleaning and a check for debris keeps the door running smoothly without a service call.
- Don’t force a stuck door. Pulling on a door with a broken spring or cable can bend panels or the track, adding a panel replacement to a spring bill. Leave it down and call.
- Ask whether repair or replacement makes more sense. On a door that’s badly damaged, we’ll tell you honestly when replacement is the better long-term value, so you aren’t paying to patch a door that’s on its way out.
- Get a free written estimate. We provide a clear, itemized estimate before any work begins, and that’s the price you pay. There are no surprise add-ons. Call (844) 793-4614 to book one.
One note worth making: if you’re weighing repair against a new door, the choice is usually about how much life is left in the door itself, not the opener. A solid door with a bad opener or worn springs is a repair. A door that’s cracked, warped, or rusted through the frame is a replacement, and the new-door ranges above start at $700. We’ll walk you through it on a free estimate so the decision is yours, made with real numbers.
For more detail on the services behind these prices, see our garage door repair page. You can also read the Somerville Garage Door Repair Pros overview for the full scope of what we handle.
FAQs – Garage Door Repair Cost
How much does garage door repair cost in Somerville?
Garage door repair in Somerville typically costs $150 – $600, depending on the job. Spring repair runs $180 – $340 per spring, cable repair $130 – $250, and opener repair $120 – $320. Call (844) 793-4614 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is usually cheaper when the door is solid and only the springs, opener, cables, or rollers have failed. Replacement generally makes more sense when the door panels are cracked, warped, or rusted through, because repeated repairs add up. New door installation runs $700 – $2200, while most repairs stay well below that. Call (844) 793-4614 for a free estimate that compares both options honestly.
How much does spring repair cost if both springs are bad?
Spring repair is $180 – $340 for one spring, so a matched pair, which we usually replace together, costs about twice that. Springs wear as a set, and replacing one while leaving the other often leads to a second breakdown soon after. Call (844) 793-4614 for a written estimate – estimates are free.
Can you come today if my door is stuck?
Same-day service is available for many jobs, and we answer the phone 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 793-4614 and we’ll get you scheduled.
Do you charge more for emergency or same-day work?
No. The price for urgent work is set the same way as any other job: by the written estimate for that specific repair. We don’t add a premium for same-day or emergency calls. Call (844) 793-4614 to book – estimates are free.
Whether you’re facing a snapped spring, an opener that’s gone dead, or a door that won’t move, one call covers the full scope. We handle repair, spring work, opener electronics, and full installation as one garage door specialist, working on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Our technicians have up to 11 years of experience, and the written estimate is the price you pay. Call (844) 793-4614 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Somerville market as of 2026. Somerville Garage Door Repair Pros offers free estimates – call (844) 793-4614.
Written by the team at Somerville Garage Door Repair Pros.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Sarah Novak"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Greg Sullivan"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Carrie Parker