Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Arlington?
A typical garage door repair in Arlington runs $150 – $600, with most jobs landing near the lower half of that range. A single torsion spring replacement costs $180 – $340, a cable repair $130 – $250, and a new door installation $700 – $2200. The written estimate sets the final price, and we give you that estimate for free before any work begins.
Arlington homeowners use their garage doors differently than most towns. Lots of properties here sit on narrow, hilly lots off Massachusetts Avenue and Broadway, where the garage door is often the only realistic way into the house from the car, especially in winter when the side stairs ice over and the driveway is too steep to shovel to the front walk. That makes a door that won’t open more than an inconvenience – it’s the front door. We treat it that way, whether you’re in East Arlington near the Thompson School, over by Arlington Heights, or down by the Reservoir. Call (844) 793-4614. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Garage door repair in Arlington: typical estimated range $150 – $600.
- Spring repair is $180 – $340 for one spring; a matched pair usually runs about twice that.
- New door installation: $700 – $2200 depending on size and material.
- Opener repair: $120 – $320; opener installation: $250 – $550.
- Free estimates, and the written estimate sets the final price.
Garage Door Cost Breakdown (2026)
Here’s how the numbers shake out for common jobs in Arlington this year. These are typical estimated ranges for the Arlington market, not a promise about any single job – what your door actually needs determines where you land.
| Service | Typical Estimated Range |
|---|---|
| Garage Door Repair (general) | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2200 |
If your door has two springs – and most residential doors do – and both are the same age and worn out, we’ll usually replace them as a matched pair. That pair costs about twice the single-spring range, so budget roughly $360 – $680 for a full two-spring replacement. Replacing them together saves you a second service call a few months down the road when the other spring gives out.
What pushes a job toward the top of a range? Heavier doors, higher-lift or low-clearance setups, doors with non-standard track configurations, and jobs where the original installation was done poorly and has to be corrected before anything new will work right. Older homes around Arlington Heights and the Jason Heights area sometimes have garages that weren’t built to standard dimensions, and an oddball opening adds time and parts. On the flip side, a straightforward roller swap or a single panel replacement stays near the bottom of its range.
What Affects Garage Door Pricing in Arlington
- Door size and weight. A single-car door needs one spring; a double-car door needs two heavier springs and taller track. The bigger door pulls the whole job up. Many Arlington garages are full-ceiling height and standard width, which keeps things simple, but a few older blocks have undersized openings that need custom fitting.
- Cold-weather spring fatigue. New England winters are hard on torsion springs. The freeze-thaw cycle and the number of daily open-and-close cycles put real stress on the metal, and springs tend to fail during the coldest stretches – often in January or February when you least want to deal with it. A properly rated spring lasts longer than a cheap replacement, which is why we match the spring to the door weight rather than grabbing whatever fits.
- Opener age and connectivity. If your opener is a smart unit or a legacy model, diagnosis changes. We work across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, so we’re familiar with brand-specific quirks rather than guessing at the circuit board. A connectivity issue on a smart opener is a different repair than a burnt-out motor.
- Track and alignment condition. A door that jumped the track risks bending panels if it’s forced. Straightening an out-of-alignment track early ($120 – $240) usually costs less than letting it bend a panel and paying for panel replacement ($250 – $500) on top.
- Material and insulation. For a new door, an uninsulated steel door sits near the bottom of the $700 – $2200 range; an insulated double door or a higher-end model pushes toward the top. Given how often Arlington homes use the garage as a windbreak entry, insulation is worth weighing, though it’s a comfort choice, not a structural requirement.
- Access and driveway slope. A steep driveway changes how the vehicle parks and how a technician has to set up, and a tight or low-clearance garage can call for low-headroom hardware. It doesn’t usually add a line item, but it’s a reason some jobs take longer than the same job on a flat lot elsewhere.
How to Save on Garage Door Costs in Arlington
The single biggest money-saver is catching a problem before it becomes a bigger one. A rubbing sound, a door that slams down, or a bottom seal that’s torn all signal something to fix now rather than after a panel bends.
- Replace springs in matched pairs. If both springs are the same age and one has failed, the other isn’t far behind. Doing both at once costs more up front but avoids a second call and a second labor charge later.
- Get the free estimate in writing. The written estimate sets the final price. Ask for the line items – spring, cable, labor – so you can see where the cost comes from and decide what’s essential.
- Fix the small stuff early. Worn rollers ($110 – $220) are cheaper than the track damage they cause. Torn seals let in cold air and moisture, which wears down the hardware faster.
- Don’t force a stuck door. If the door won’t move, stop and call. Yanking on a door with a broken spring or snapped cable can bend panels and turn a $180 – $340 spring job into a repair plus panel replacement.
- Weigh repair against replacement honestly. If the door is old, the panels are dented, and the opener is failing, sometimes a new installation ($700 – $2200) makes more sense than three separate repairs. We’ll tell you when that’s the case – and when it isn’t.
For a free estimate, call (844) 793-4614. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
The Safety Side of the Price
We’d be doing you a disservice not to flag this. Torsion springs and the cables that run alongside them are under enormous tension. A spring that’s under load can release violently if handled without the right tools and technique, and that’s why we keep spring work and cable work in the hands of trained technicians. If you’re hearing a loud snap or seeing a gap in the spring, don’t try to open the door by hand and don’t attempt the repair yourself. Call us. Our technicians have up to 11 years of experience with these high-tension repairs, and spring repair is a core part of what we do, not an upsell. The same caution applies to opener wiring and any electrical work at the motor or the wall switch – that’s a job for a professional, and we treat it that way.
Repair or Replace? A Quick Way to Decide
If the door is structurally sound and only one part has failed, repair is almost always the lower-cost path. A single spring at $180 – $340 or a cable at $130 – $250 is a fraction of a new door. But when several systems are failing at once – the door is old, the panels are dented, the opener is dying, and the tracks are worn – the repair costs start stacking up toward the price of a new installation. Here’s the rough rule we use: if the combined repairs approach half of what a new door would cost, it’s time to talk about replacement, not because we want to sell you a door, but because you’ll spend less over the next few years.
What a Typical Arlington Garage Door Visit Involves
When you call, we ask a few questions to get a picture of the problem before anyone arrives – what the door does when you press the button, whether you heard a snap, how old the opener is, and what brand. When a technician arrives, they inspect the springs, cables, rollers, tracks, and opener as a system, because a door failing in one spot often has wear in another. You get a written estimate before work starts. In a lot of cases the repair happens the same day. We work across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, so the diagnosis tracks the brand rather than starting from scratch every time. If you’re comparing options across the area, you can also read more about Somerville Garage Door Repair Pros and the surrounding towns, since plenty of neighbors just over the line in Somerville use the same service.
One call covers the full scope: spring repair, opener repair or replacement, cable and track work, panel replacement, and complete new door installation. You’re not passed between a repair tech and an installer. If you’ve been putting off a tune-up because the door “still works,” this is a good moment to have it checked – a quick inspection now is cheaper than an emergency call later, and it’s easier on the door in the long run.
FAQs – Garage Door Cost in Arlington
How much does garage door repair cost in Arlington?
Garage door repair in Arlington typically runs $150 – $600, depending on the part and the door. A single spring replacement is $180 – $340, and a cable repair is $130 – $250. Call (844) 793-4614 for an exact quote – estimates are free.
How much does a new garage door cost in Arlington?
A new door installation in Arlington typically runs $700 – $2200. An uninsulated single door sits near the bottom of that range; an insulated or double door moves toward the top. The written estimate sets the final price, so call (844) 793-4614 to get yours.
Is it cheaper to repair or replace a garage door?
Repair is usually cheaper when only one part has failed – a single spring at $180 – $340 beats a full replacement at $700 – $2200. But when several systems are worn at once, replacement often wins over time. Call (844) 793-4614 and we’ll give you an honest read, with no pressure either way.
Can you come today for a garage door problem?
Same-day service is common for most repairs, and emergency service is part of our standard offering, not a premium tier. Call (844) 793-4614. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
How much does opener repair or replacement cost in Arlington?
Opener repair typically runs $120 – $320, and a full opener installation is $250 – $550. A connectivity problem on a smart unit often costs less than a full motor replacement. Call (844) 793-4614 for a free estimate on your specific opener.
How much does spring replacement cost, and is it priced per spring?
Spring repair is $180 – $340 for one spring. If both springs are worn, they’re usually replaced together, and a matched pair costs about twice the single-spring range – roughly $360 – $680. Call (844) 793-4614 to confirm what your door needs.
Whether it’s a spring that snapped in the cold, an opener that won’t respond, or a door you’re thinking about replacing, the fastest way to a real number is a phone call. Call (844) 793-4614 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the final price, and we’ll tell you plainly what your door needs and what it doesn’t.
Pricing reflects the Arlington market as of 2026. Somerville Garage Door Repair Pros offers free estimates – call (844) 793-4614.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Sarah Novak"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Greg Sullivan"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Carrie Parker