Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Somerville Homeowners
A broken spring doesn’t announce itself politely. One morning the door feels impossibly heavy, or you hear a sharp bang from the ceiling of the garage, and suddenly the car is trapped inside. In Somerville, where a lot of garages sit under the house or tucked behind triple-deckers on tight lots, that failure shuts down the way you get to work. We handle garage door spring repair as a core service, not an add-on, and our technicians have up to 11 years of experience with the torsion and extension systems common on this city’s housing stock. Same-day service is often possible, and the price is quoted and agreed before any work starts.
Spring failure is a safety issue. A torsion spring under load carries enough stored energy to injure someone badly, which is why so many general contractors decline the job. We don’t. Call (844) 793-4614 and we’ll get you scheduled. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Garage Door Spring Repair Service Includes
Spring work on a residential door covers six related jobs. Some doors need one of them, some need several at once. We tell you which before we touch anything.
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on a steel shaft above the door, and it does the actual lifting work so you don’t have to. When it breaks, usually with a loud snap, the door becomes dead weight and the opener strains or fails trying to move it. We replace torsion springs on the doors common around Somerville, including Amarr and Clopay setups, and we match the spring to the door’s weight rather than grabbing whatever fits.

Extension Spring Replacement
Extension springs run along the horizontal tracks on either side of the door and stretch as the door closes. They’re common on older garages, and when one lets go it can whip toward anything nearby, which is why we check the safety cables at the same time. We replace extension springs in matched pairs and confirm the door balances properly afterward. If your garage is one of the older detached ones behind a Somerville triple-decker, this is often the setup you have.

Broken Spring Repair
Broken spring repair means diagnosing exactly which spring failed and why, then restoring the door to safe operation. A snapped torsion spring usually leaves a visible gap in the coil, and a stretched extension spring often looks longer than its partner. We confirm the failure, check for related damage to cables and drums, and replace what’s actually broken instead of quoting a full rebuild you don’t need.

Spring Adjustment
Sometimes a spring isn’t broken at all, just out of balance, which shows up as a door that slams down or drifts open on its own. Adjustment means setting the spring tension so the door holds position and lifts with reasonable effort. We test balance at the halfway point and adjust until the door behaves the way the manufacturer intended, which also takes strain off your opener motor.
Safety Cable Installation
Safety cables are the steel cables that run through the center of extension springs so a broken spring can’t fly across the garage. Older installations often have none, or have cables that have rusted through. We fit new cables whenever we replace extension springs, and we’ll tell you plainly if yours are missing. It’s a small part of the job with a real effect on how safely the door fails.
Spring Inspection
An inspection checks spring coils for gaps and rust, cables for fraying, drums for wear, and the door’s overall balance. It’s worth doing if your door is over ten years old, sounds different than it used to, or has never been looked at. We report what we find and give you a written estimate for anything that needs attention, with no obligation to proceed.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work on your brand, and we know where each one tends to wear. Amarr doors often come through with heavier panel weights that call for a specific spring pairing, so we check the door’s actual weight rather than assuming. Wayne Dalton systems show up frequently on Somerville’s older two- and three-family buildings, and their hardware has its own quirks when it comes to how the spring tension interacts with the track assembly. Craftsman setups, especially where the opener and door have aged together, need the spring corrected before the opener is blamed for a problem it didn’t cause.
Raynor doors turn up on newer construction and additions around the city, and their spring configurations are straightforward once you’ve measured them properly. We don’t guess at spring sizes on any of these. Whether you have Amarr, Wayne Dalton, Craftsman, Raynor or another make entirely, we can help. Spring work is one trade, and it’s the only one we do.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. That snap is often the torsion spring breaking, and the door won’t lift afterward. Stop using the opener immediately so the motor doesn’t burn out trying to move a door it can’t lift.
- The door feels extremely heavy when you lift it by hand. A balanced door should lift with one hand and stay put halfway up. If it feels like dead weight, the spring has lost tension or failed.
- A visible gap in the spring coil. Look at the torsion spring above the door. A clean break in the coil means replacement, not adjustment. Don’t try to wind or unwind it yourself.
- The door slams down or drifts open on its own. Poor balance points to spring tension that’s off. Left alone, it wears out the opener and puts stress on the cables.
- The opener strains or the door reverses partway. Often the spring is the culprit, not the motor. We diagnose which before recommending any repair, so you’re not paying for an opener you don’t need.
Our Garage Door Spring Repair Process – Step by Step
- 1
Phone diagnosis. We ask what the door is doing, what it sounds like, and what brand it is. That narrows down whether you’re dealing with a torsion or extension setup before anyone arrives, which means the right parts are more likely to be on hand.
- 2
On-site inspection. We check the springs, cables, drums, rollers, and the door’s balance. We measure the door’s weight and the existing spring dimensions rather than relying on a generic size chart.
- 3
Written estimate before work. You get the price in writing, agreed before anything is touched. If we find something else that needs attention, we tell you and you decide. Nothing gets added to the bill without your say-so.
- 4
The repair itself. Springs are wound and unwound with proper winding bars, never by hand or with improvised tools. We replace matched pairs together, fit or check safety cables, and confirm the door cycles cleanly several times before we call it done.
- 5
Final balance and safety check. We test the door’s balance at halfway, check the auto-reverse, and make sure the opener isn’t straining. You get a walkthrough of what we did and what to watch for going forward.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Somerville?
Garage door spring repair in Somerville typically runs $180 – $340 for a single spring. That’s the range for one spring, and since matched pairs are usually replaced together, a pair costs about twice that. The written estimate sets the final price, and the estimate itself is free.
What affects the price: whether it’s torsion or extension, whether it’s one spring or a pair, and whether cables or drums need attention at the same time. A door that’s been run on a broken spring for a while often needs more than just the spring, since the opener and cables take a beating in the meantime.
| Service | Typical Estimated Range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Matched pair | about twice the single-spring range |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
How to avoid overpaying: get the estimate in writing before work begins, and ask whether the quote covers one spring or a pair. A quote that seems low for a pair is often a quote for one spring. Our free estimate spells out exactly what’s included, and the price we agree on is the price on the invoice.
Garage Door Spring Repair Near Somerville – Our Service Area
We connect homeowners across Somerville with local pros who handle Somerville garage door repair, along with spring work in Cambridge, Medford, Everett, Malden, Chelsea, Arlington, Belmont, Watertown, Winchester, Melrose, and Brookline. Response times vary by location and how booked the day is, but same-day service is often possible for spring failures. If you’re just over the line in garage door spring repair territory or up toward garage door spring repair in Cambridge, the same team covers you. Call and we’ll confirm timing for your address.
Serving Somerville, MA – Our Local Coverage Area
We serve Somerville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Somerville
Garage door spring repair is the replacement or adjustment of the torsion or extension springs that counterbalance your door’s weight. Without a working spring, the door is too heavy for the opener to lift safely. The job involves measuring the door, matching the right spring, and winding it to the correct tension with proper tools.
Most single-spring replacements take about an hour once the technician is on site. A matched pair or a job that includes cables and drums can run longer. We give you a realistic window when you book rather than a number that sounds good on the phone.
Expect $180 – $340 for one spring, with a matched pair running about twice that since both are usually replaced together. The written estimate sets the final price, and it’s free. Call (844) 793-4614 for an exact quote.
Yes. We service Amarr and Wayne Dalton equipment, along with Craftsman and Raynor, and we know how each brand’s spring hardware behaves. That means fewer surprises when we open the garage and fewer return visits. Call (844) 793-4614 to book.
Same-day service is often possible for spring failures. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 793-4614 and we’ll tell you what’s available.
We stand behind the work and will walk you through what’s covered on your specific job when we give you the estimate. Ask about it before work starts so there are no surprises later. Call (844) 793-4614 with any questions about coverage.
Clear the floor of the garage so the technician can work safely, and stop using the door and opener until the repair is done. If you know the door brand, have it ready, and point out anything that’s been acting strange. Call (844) 793-4614 to set up a time.
Schedule Your Garage Door Spring Repair Service in Somerville Today
A broken spring is a job for someone who does this every day, not a weekend project. We handle torsion and extension springs, cables, and balance checks as core work, with the price agreed before anything starts. Call (844) 793-4614 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If your door won’t lift, call us and let’s get it sorted.
Written by the team at Somerville Garage Door Repair Pros.