Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Revere?
Garage door repair in Revere typically runs $150 – $600, with most single-visit jobs landing near the middle of that band. The most common emergency call, a broken torsion spring, costs about $180 – $340 for one spring. A full new door installation is a bigger project, typically $700 – $2200 depending on door size, insulation and the opener setup you choose.
Those are typical estimated ranges for the Revere market as of 2026. Every job gets its own written estimate, and that written estimate sets the final price. If you want a firm number before anyone touches your door, call (844) 793-4614 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most garage door repairs in Revere fall between $150 and $600.
- One broken spring costs $180 – $340; a matched pair is usually replaced together and runs about twice that.
- Opener repair is $120 – $320; a new opener installed is $250 – $550.
- A whole new door installed is $700 – $2200, and the opener is priced separately.
- Estimates are free and the written estimate sets the price. Call (844) 793-4614.
Garage Door Cost Breakdown (2026)
Here’s what each kind of job typically costs in Revere. Use this table to get a rough sense of where your problem sits before you call.
| Service | Typical Estimated Cost | What It Covers |
|---|---|---|
| Garage Door Repair (general) | $150 – $600 | Most single-visit repairs on a door that has stopped working correctly |
| Spring Repair (one spring) | $180 – $340 | Replacing a single torsion spring, including the balancing adjustment |
| Cable Repair | $130 – $250 | Replacing a frayed, kinked or snapped lift cable and re-leveling the door |
| Opener Repair | $120 – $320 | Motor, circuit board, gear, sensor and connectivity faults |
| Opener Installation | $250 – $550 | Supplying and installing a new opener, plus rail and safety sensor setup |
| Panel Replacement | $250 – $500 | Swapping a dented or cracked section without replacing the whole door |
| Track Realignment | $120 – $240 | Straightening bent track and resetting rollers so the door travels cleanly |
| Roller Replacement | $110 – $220 | New rollers, usually done as a set, to quiet a noisy or jerky door |
| New Door Installation | $700 – $2200 | A complete new door, sized and installed, with opener priced separately |
A matched pair of springs costs about twice the single-spring range because both are almost always replaced together. Running one new spring against an old one leaves the door out of balance, and the older spring usually fails shortly after. We’d rather tell you that up front than have you call us back in a month.
What pushes a job toward the top of a range? Door size, a two-car door carries more weight and heavier springs than a single door. Age and brand matter too. A Wayne Dalton door with a torque-master tube has a different parts picture than a standard torsion setup, and an older Craftsman opener can need a board that takes a bit more chasing down than a current LiftMaster.
What Affects Garage Door Pricing in Revere
Revere homes are a mix of older two- and three-deckers, mid-century ranches, and newer construction near the beach and along the main roads. That mix shows up in garage door pricing.
- Door type and weight. A single-car door and a wide two-car door don’t take the same springs or the same amount of balancing. Heavier doors cost more to repair because the hardware that lifts them is heavier too.
- Brand and parts availability. We work on the eight brands we see most in Revere: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. A door on a common brand is usually a straightforward fix. An oddball import can mean waiting on parts, which affects timing more than price.
- Whether it’s one spring or two. Torsion systems often carry two springs. If one breaks, replacing both is standard practice, so budget for roughly double the single-spring range.
- New England weather. Freeze-thaw cycles and cold winters are hard on springs, cables and the lubricant in your opener’s moving parts. A door that’s neglected through the winter tends to fail in the first cold snap, which is why we see a lot of spring work in Revere in late fall and early spring.
- Age of the door. A door past its teens is often a decision point: repair what’s worn, or put the money toward a new door. We’ll give you both numbers and let you decide.
- Opener electronics. A basic opener with a motor fault is a simple repair. A smart opener with connectivity, battery backup and app pairing takes more diagnostic time.
If you’re comparing repair costs with what a replacement would run, our Somerville garage door repair pros page covers that same repair-versus-replace question for homeowners in the next town over.
How to Save on Garage Door
You don’t need to spend the maximum to get a door that works. A few practical moves keep the bill down.
- Fix small problems before they get big. A noisy roller or a slightly bent track is a $110 – $220 job. Left alone, it wears the door’s hinges and can lead to a spring failure down the line.
- Get a written estimate before work starts. Every job we quote comes with a written estimate, so you know the number before anyone begins. Estimates are free: call (844) 793-4614.
- Replace both springs at once. It sounds like more, but replacing one spring and then the other a few months later costs more overall and means two service visits.
- Lubricate and check your door yourself. A little spray lubricant on the rollers, hinges and springs a couple of times a year goes a long way, especially before winter. That’s maintenance, not repair, and it’s safe to do.
- Ask about panel replacement instead of a whole new door. If one section is dented and the rest is fine, a new panel at $250 – $500 is far less than a full installation.
One thing we won’t do is talk you into a new door when a repair is the right call. If your door has life left in it, we’ll say so.
Same-Day and Emergency Garage Door Service
Most garage door problems show up at the worst time: a door that won’t close on your way to work, or one that won’t open when you’re trying to get in. Emergency service is part of what we do, not a premium tier.
Here’s how it works. Call (844) 793-4614. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If your call comes outside those dispatch hours, we’ll book you into the next opening. We’re closed on Saturday, so a call then gets you on the schedule for Sunday. Same-day service is available for most repairs when you call early.
Why Choose a Specialist for Your Revere Garage Door
A garage door is 100% of what we do. That matters because the work is more specific than it looks. A spring under tension, a door that’s slightly out of balance, an opener that trips its safety sensor on a cold morning, these are all jobs that reward someone who has seen the same problem a dozen times on the same brand.
Our technicians have up to 11 years of experience. We’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, so we diagnose by how that brand typically fails rather than by trial and error. Opener repair is its own specialty on our side, covering motor, circuit board and connectivity issues on both smart and legacy systems. And we handle spring repair in-house, the high-tension repair many general contractors won’t touch.
One call covers repair, opener work, springs and full installation. No subcontracting, no scope gaps. If you’re also comparing what a new opener would cost alongside a door repair, our garage door opener repair page breaks that down.
Spring Safety: What Every Revere Homeowner Should Know
Torsion springs and lift cables hold the full weight of your door. They’re under high tension, and when one lets go, the force is serious. That’s why we treat spring and cable work as a safety job, not a quick DIY.
Here’s what to do if a spring snaps: don’t try to open the door by hand, don’t cut or loosen a cable, and don’t stand under the door. Keep everyone clear and call us. We’ll get a technician out to assess it and replace the spring safely. The price range of $180 – $340 for one spring includes the balancing work that keeps the door running evenly afterward. Call (844) 793-4614.
Frequently Asked Questions
How much does garage door repair cost in Revere?
Garage door repair in Revere typically costs $150 – $600, depending on what’s broken. A spring, cable or track fix usually falls in the lower half of that range; panel work or a combination of repairs pushes toward the top. Call (844) 793-4614 for a free estimate, and the written estimate sets the final price.
How much does a new garage door cost in Revere, MA?
A new garage door installed in Revere typically costs $700 – $2200. The range covers door size, insulation and material; an opener is priced separately at $250 – $550 if you need one. Call (844) 793-4614 for a free on-site estimate.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper than replacement. A typical repair at $150 – $600 is well below a new door at $700 – $2200, and if your door is structurally sound, repair is the smarter call. Replacement makes sense when the door is failing across multiple sections or the panels are damaged beyond repair. We’ll give you both numbers so you can compare. Call (844) 793-4614.
How much does a garage door spring replacement cost in Revere?
One torsion spring replacement in Revere typically costs $180 – $340. Because springs are usually replaced in matched pairs, a two-spring job runs about twice that range. Never let anyone adjust a spring without the proper tools, this is a high-tension part. Call (844) 793-4614 for an exact quote.
Can you come today?
Same-day service is available for most repairs, especially if you call early. Call (844) 793-4614. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed on Saturday, so a call then gets you booked into the next opening on Sunday.
Get Your Free Garage Door Estimate in Revere
Whether it’s a noisy roller, a snapped spring or a full new door, you’ll get a typical price range, a clear written estimate, and work done by a specialist who does garage doors every day. We work on the brands you own, we handle the high-tension work others won’t, and the estimate is free. Call (844) 793-4614 to get started. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Revere market as of 2026. Somerville Garage Door Repair Pros offers free estimates – call (844) 793-4614.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Sarah Novak"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Greg Sullivan"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Carrie Parker