Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Spring Repair Across Melrose
If your garage door won’t lift and the opener is straining, a broken spring is almost always the reason. We handle garage door spring repair in Melrose as a core service, not a sideline, and we know how these older detached garages tend to fail. Most of the homes we see here sit in an inner-ring Boston suburb where the doors were retrofitted into carriage-house and Model T-era footprints, so a spring call is often as much about the opening as the spring. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 793-4614.
Why Melrose Homeowners Call Somerville Garage Door Repair Pros for Garage Door Spring Repair
Serving Melrose means reading a door by how it was built, not guessing from a picture. On the tight lots off the streets near the Common, an install often happens by hand in a shared driveway with no staging room, so we plan the job around the space that’s actually there. That’s the kind of local knowledge that keeps a repair honest.
Our technicians have up to 11 years of experience, and spring repair is treated as a safety-critical job from the first look at the drums and bearing plates. We work on the brands these doors actually carry, including LiftMaster, Craftsman, and Raynor, so we diagnose brand-specific behavior instead of swapping parts and hoping. When you call, we ask what the door is doing and what kind of garage it’s in, because in Melrose the answer usually tells us whether it’s a spring, a cable, or a framing problem, and that shapes the visit before anyone arrives. See our garage door spring repair service for the full scope of what we handle.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Spring Repair Services in Melrose
Spring work here centers on the three jobs we get called for most: torsion replacement, broken spring repair, and safety cable installation, plus the adjustments that keep a door balanced once it’s back up.
Torsion Spring Replacement in Melrose
Torsion springs carry the door’s weight, and in these older garages they’re mounted in low-headroom spaces where the housing is tight against hand-framed headers. We match the spring to the door’s actual weight and cycle count rather than ordering a standard size off a photo. A torsion spring is a high-tension component, so this is one repair to leave to a trained professional; the stored energy in a wound spring can cause serious injury if it lets go unexpectedly.

Extension Spring Replacement in Melrose
Some of the converted carriage houses and widened one-car garages still run extension springs along the horizontal tracks. On doors exposed to road-salt spray from plowed streets, the cables and hooks around extension springs corrode faster than the spring itself, so we check the whole assembly and not just the coil. Replacing one spring without the other usually shortens the life of both, so we’ll tell you plainly when a matched pair makes more sense.

Broken Spring Repair in Melrose
When a spring snaps, the door becomes too heavy to lift and the opener strains against a dead load. In Melrose’s older detached garages, we typically find the break at the first hard freeze or the spring thaw, when cold and freeze-thaw cycles finish off a spring that’s already past its rated life. We get the door level and safe before we leave, and we check the opener afterward so it isn’t quietly damaged from pushing a stalled door.

Spring Adjustment and Safety Cable Installation in Melrose
Out-of-square openings on these old garages bind the sectional door, which overloads the spring and wears it out early. We adjust spring tension to balance the door against that binding, and we install fresh safety cables through extension springs so a broken spring stays contained instead of flying loose. On a hand-framed opening, the balance check is what tells us whether the spring is the whole problem or just part of it.
Trusted Brands We Service in Melrose
We’re familiar with the products on the doors in this town, including Wayne Dalton, LiftMaster, and Craftsman, and we diagnose each by how that brand actually behaves when a spring or opener fails. We don’t claim to stock parts locally, so turnaround depends on getting the right component for your door, and we tell you that up front. What matters is matching the spring to your door’s weight and cycle rating, then balancing it correctly so the repair holds through the next freeze.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Spring Repair Problems We See in Melrose Homes
This is the part a generic spring page skips. Here’s what actually goes wrong on Melrose doors.
- Narrow, out-of-square openings. The original detached garages were built for Model T-era cars and are often only 8 to 9 feet wide inside, too narrow for a modern 8-foot sectional door, so the opening is frequently out of square and binds the door. Spring replacement alone won’t fix that binding; the front wall framing usually needs attention first.
- Torsion springs snapping in the cold. A torsion spring rated for about 10,000 cycles on an old, low-headroom door gets cycled far beyond its rating and tends to break during the first hard freeze or the spring thaw. That’s when the calls cluster.
- Corroded cables and worn drums. Detached garages take road-salt spray from plowed streets, which eats at cables and drums and leads to a cable snap and uneven spring tension. A snapped cable can whip, so we treat it as urgent, not cosmetic.
- Out-of-square openings overloading the spring. When a hand-cut opening is slightly off, the door drags every cycle, and that drag quietly shortens the spring’s life no matter how good the new spring is.
Pricing for Garage Door Spring Repair in Melrose, MA
Spring repair in Melrose typically runs $180 – $340 for one spring, and that’s an estimate, not a fixed price. A matched pair is usually replaced together, so a pair costs about twice that range. What moves the number is the door’s weight, the spring type, whether cables or drums need replacing, and whether an out-of-square opening needs framing work before a new spring will hold. We quote and agree the price before any work starts, so the written estimate is what you pay.
| Service | Typical estimated range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
Estimates are free. Call (844) 793-4614 for an exact quote on your door.
We Also Serve Cities Near Melrose
We handle spring work across the area around Melrose, including Malden, Stoneham, Everett, and Medford. If you’re just over the line from one of these towns, the same older-housing considerations usually apply, and we’re glad to take a look.
Serving Melrose, MA – Our Local Coverage Area
We serve Melrose and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Spring Repair in Melrose
It’s almost always the spring, not the opener. A humming opener usually means the motor is trying to lift a door the spring is no longer carrying, and that dead load can damage the opener if you keep cycling it. Stop running it and call (844) 793-4614 for a free estimate; we’ll confirm which part failed before any work starts.
Freeze-thaw cycles and cold are the main cause. A spring already near the end of its life tends to snap during the first hard freeze, and then again through the spring thaw as temperatures swing, which is why the calls cluster in those windows. Road-salt spray from plowed streets also corrodes the cables and drums, adding stress. Call (844) 793-4614 for a free estimate.
Sometimes the spring alone won’t solve it, because an undersized or out-of-square opening binds the door and overloads the spring. Many of the original detached garages here are only 8 to 9 feet wide inside, so a technician typically measures the opening and checks the framing before quoting rather than ordering a standard spring from a photo. Call (844) 793-4614 for a free estimate.
Yes, if the door is used daily and the opening carries any stress. A high-cycle spring is rated for more cycles than a standard one and handles the load better on an old, low-headroom door that gets cycled heavily. It usually helps the repair last longer. Call (844) 793-4614 for a free estimate on your door.
Yes, Sunday is within our dispatch schedule. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 793-4614.
When a spring lets go, the door that moves every day stops moving, and you need a specialist who understands what’s actually wrong. We treat spring repair as a considered repair, not an upsell, and we check the opener, cables, and framing so the fix holds. Call (844) 793-4614 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Somerville Garage Door Repair Pros.