Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Spring Repair Across Boston
If your garage door banged once and won’t lift, the spring broke. On Boston’s salt-exposed streets that happens sooner than most homeowners expect, and it’s the repair we handle most. We connect Boston homeowners with local pros who know the difference between a spring that failed from fatigue and one that corroded through. Our technicians have up to 11 years of experience, and spring work is a core service rather than an upsell. The estimate is free, and the price is quoted and agreed before any work starts.
Call (844) 793-4614. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Boston Homeowners Call Somerville Garage Door Repair Pros for Garage Door Spring Repair
Boston garage doors live in harder conditions than suburban ones. Salt air off the harbor and the Seaport works on spring wire, end bearing plates and every hinge and roller in the track, and a standard steel spring that would run for years inland can pit and snap here well before it reaches its rated cycles. Freeze-thaw winters add their own strain. Snow and ice frozen at the door base seize the bottom seal, the opener works harder to drag a door the spring should be lifting, and a weakening spring stays hidden until the morning it doesn’t.
We focus on garage doors and nothing else, which matters when a spring job goes past the obvious. Any general handyman can swap a spring on a standard door. A century-old brick carriage house with an odd opening and low headroom is a different conversation, and that’s the conversation Boston asks for. Our technicians read the door’s actual setup before quoting: weight, drum and cable arrangement, track alignment, balance, and whether the opener has been carrying weight it was never meant to.
We answer every call, including the ones that come in when a door is stuck open on a cold night. We work on Wayne Dalton, Craftsman, LiftMaster and Raynor doors and openers, so the diagnosis follows how that brand’s hardware usually behaves. If you’re locked out and the door won’t move, call and we’ll get you booked.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Spring Repair Services in Boston
Torsion Spring Replacement
Torsion springs sit on a shaft above the door and carry its full weight. In Boston’s coastal air, the wire and the end bearing plates corrode faster than the door they serve, so replacement is common. We match the spring to the door’s actual width, weight and drum setup, and we fit galvanized or coated springs where the exposure calls for it.

Extension Spring Replacement
Extension springs run along the sides and stretch as the door closes. Boston’s older multifamily homes and East Boston carriage houses often carry them, and a stretched spring can break violently when it goes. We replace them as a matched pair and fit safety cables so a failure stays contained.

Broken Spring Repair
A snapped torsion spring is the loudest failure in the trade and the most dangerous to be near. The spring is under high tension, and handling it without the right winding bars and know-how can cause serious injury, so this isn’t a job to attempt yourself. We replace the failed spring and check the cables, drums and track while we’re there.

Spring Adjustment and Safety Cable Installation
Not every heavy door needs a new spring. Sometimes the tension has drifted, the door is out of balance, or cables have stretched. We adjust tension, verify balance, and install or replace safety cables, which keep a broken spring from whipping across the garage.
Trusted Brands We Service in Boston
We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor products, and that familiarity changes how fast a problem gets diagnosed. A Craftsman door that won’t lift after a bang reads differently from a Wayne Dalton with a torque-tube setup, and knowing the hardware going in saves guesswork. We don’t stock parts; the local pro brings what the door needs after sizing it on site. That’s how an odd retrofit width gets the right spring instead of the nearest off-the-shelf fit. Full scope from one specialist: springs, openers and installation.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Spring Repair Problems We See in Boston Homes
- Salt-air corrosion of springs and bearing plates. Harbor air and Seaport exposure pit standard steel spring wire and end plates, so springs snap earlier than their rating. Coated or galvanized springs and stainless fasteners buy back life in that air.
- Freeze-thaw strain on the opener. Ice frozen at the door base seizes the bottom seal and loads the opener, hiding a spring that no longer carries the door’s weight. If the door feels heavy by hand, the spring is telling you something.
- Tight carriage-house and below-grade fits. Many doors are tucked under stoops or set behind the building line, with low headroom and odd widths off the original openings. Generic springs don’t match those dimensions and fatigue early.
- Misaligned or corroded tracks and rollers. Coastal moisture roughens rollers and track, binding the door and adding drag the spring has to fight. We check and realign these with the spring work.
Pricing for Garage Door Spring Repair in Boston, MA
A typical garage door spring repair in Boston runs $210 – $400 for one spring. A matched pair is usually replaced together, so a pair costs about twice that. The written estimate sets the final price, and the price is quoted and agreed before any work starts. What moves the number is the spring type, whether the door is a tight retrofit needing a custom-wound spring, and any cable or track work the inspection turns up. Estimates are free.
| Service | Typical Estimated Range (Boston) |
|---|---|
| Spring Repair (one spring) | $210 – $400 |
| Cable Repair | $155 – $295 |
| Opener Repair | $140 – $380 |
| Track Realignment | $140 – $285 |
We Also Serve Cities Near Boston
We extend the same spring service to homeowners just outside the city, including Chelsea, Winthrop Town, Cambridge and Everett. If your door sits in a coastal or older multifamily building, the same corrosion and retrofit rules apply. For more about our wider coverage, see Boston and the surrounding towns we work in.
Serving Boston, MA – Our Local Coverage Area
We serve Boston and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Spring Repair in Boston
Salt-laden air off the harbor and the Seaport pits standard steel torsion springs and end bearing plates, so they corrode and snap well before reaching their rated cycles. Freeze-thaw winters add strain at the door base. A coated or galvanized spring lasts longer in that air. Call (844) 793-4614 for an exact quote – estimates are free.
Yes. Low-headroom, below-grade and retrofit openings are common in Boston, and the pro sizes the spring and hardware to the door’s actual width and clearance rather than forcing an off-the-shelf fit. Expect a custom-wound spring to match the odd dimensions. Call (844) 793-4614 for an exact quote – estimates are free.
Often yes. If your door moves several times a day, or it’s a heavy retrofit that eats standard springs early, a high-cycle spring rated for more cycles can make sense. The pro recommends based on the door’s weight and use. Call (844) 793-4614 to talk it through – estimates are free.
Very likely. If the door is hard to lift by hand, the spring isn’t carrying its share of the weight and the opener is doing work it shouldn’t. That’s a sign to get the spring inspected before the opener motor or gear wears out too. Call (844) 793-4614 for an exact quote – estimates are free.
A typical one-spring repair in Boston runs $210 – $400, and a matched pair costs about twice that because both are replaced together. The work includes fitting the new spring, re-tensioning cables, checking balance and testing the opener so it isn’t straining. The written estimate sets the final price and is agreed before work starts. Call (844) 793-4614 – estimates are free.
Ready to get your door moving again? Call (844) 793-4614 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You can also read more about our garage door spring repair service.
Written by the team at Somerville Garage Door Repair Pros.